10x10 Bathroom Remodel Cost in 2026: Real Prices by Scope

A 10x10 bathroom is a primary suite, and it is priced like one. One hundred square feet supports a double vanity, a separate water closet, and a walk-in shower with a bench — three features that each carry their own labor and material bill.

10x10 Bathroom Remodel Cost at a Glance (2026)

• Cosmetic refresh (paint, vanity, fixtures, no layout change): $10,500-$15,000
• Mid-range gut and replace (new tile, tub or shower, vanity, fixtures): $23,000-$32,000
• Upscale build (custom tile, glass, heated floor, premium fixtures): $40,000-$55,000
• Typical mid-range cost per square foot: $230-$320 across 100 sq ft
• Typical schedule: 5 to 8 weeks from demo to final inspection

How a $27,500 10x10 Remodel Breaks Down

Here is where the money lands on a typical mid-range 100 sq ft job in an average-cost metro. Labor is the largest line, as it is in every bathroom.

• Labor across plumber, tile setter, electrician and GC: $15,125
• Tile and setting materials (about 100 sq ft floor, 180 sq ft wall): $3,575
• Tub, shower pan or base and glass: $3,575
• Vanity, top, mirror and lighting: $2,750
• Permits, dumpster, protection and contingency: $2,475

Layout Reality in a 10x10 Bathroom

Most 10x10 plans split into three zones: vanity wall, wet zone, and toilet. Zoning is what makes the room feel custom, and it is also what pulls plumbing away from the existing stack.

Per square foot, a 10x10 is the cheapest bathroom on this list — but the total is two to two-and-a-half times a 5x8 because scope grows with the room.

What Pushes a 10x10 Remodel Over Budget

1. Moving the toilet or shower drain — $2,500-$5,000, more on a slab foundation.
2. Rotted subfloor discovered at demo — $600-$2,200 in a room this size.
3. Galvanized or cast iron lines in a pre-1975 home — $900-$3,000.
4. Upgrading to a curbless or tiled shower pan instead of an acrylic base — $1,800-$4,500.
5. Choosing a small-format or patterned tile that doubles setting hours.

Regional Pricing Matters More Than Finish Level

The same 10x10 scope that costs $27,500 in the Midwest lands near $35,200 in coastal California or the Northeast, and closer to $25,575 in parts of the South. Enter your ZIP in the calculator before you compare your quote to anything you read online.

Related Sizes and Guides

• 8x8 bathroom remodel cost — a close comparison if your room measures between the two
• 5x10 bathroom remodel cost — a close comparison if your room measures between the two
• Master bathroom remodel cost estimator — the line-item detail behind these totals
• Bathroom remodel ROI — the line-item detail behind these totals

Frequently Asked Questions

How much does it cost to remodel a 10x10 bathroom in 2026?

Most 10x10 (100 sq ft) remodels land between $23,000 and $32,000 for a mid-range gut and replace. A cosmetic refresh runs $10,500-$15,000 and an upscale build $40,000-$55,000 before regional adjustment.

What is the cost per square foot for a 10x10 bathroom?

About $230-$320 per square foot at a mid-range scope. Bathrooms are fixture-dense, so smaller rooms always show a higher per-square-foot rate than larger ones at the same finish level.

How long does a 10x10 bathroom remodel take?

Plan on 5 to 8 weeks once demo starts, assuming materials are on site and no plumbing is relocated. Special-order tile, glass and vanities are the usual cause of delay, not the trades.

Do I need a permit for a 10x10 bathroom remodel?

If you change plumbing, electrical or framing, yes — expect $250-$900 in fees depending on your city. A like-for-like cosmetic refresh usually does not require one, but check locally before demo.

Is it worth converting the tub to a shower in a 10x10 bathroom?

In a 100 sq ft room a conversion typically adds $1,500-$4,000 and buys real usable space. Keep at least one tub in the house if you plan to sell to families — buyers still look for it.